 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
Laminar Flow Clean Bench VLF 797/HLF 797
SPECIFICATIONS
| Filters |
| Aluminum framed High Efficiency Particulate Air (HEPA) type, with a minimum efficiency of 99.99% at 0.3 micron, aerosol challenged (zero probed). |
| Prefilters |
| Washable type, polyurethane foam - 30% ASHRAE. |
| Airflow |
| 90 feet per minute ±10 FPM (0.45 meter per second) average velocity measured 6 in. (152.4 mm) from the diffuser screen. Uniformity ±20% of average or better. |
| Motor/Blower Assembly |
Direct drive, continuous duty 1/5 Hp, 300W, with sealed-forlife bearings and inherent overload protection. Motor/blower assembly is electronically balanced (dynamically) and mounted on vibration dampening rubber mounts. Motor/blower assembly is designed to provide rated airflow through a 50% increase in initial static pressure. |
| Speed Controller |
| Solid-state speed control with RFI suppression for adjusting airflow velocity utilizing a, easy to clean, membrane touchpad controller. |
| Electrical |
Standard 15 Amp, 115V, single phase, 60 Hz, rubber covered cord with 3-prong grounded plug. Single electrical outlet flush mounted on front blower housing. Optional fluorescent lighting fixture provides 150 foot-candles (1615 lux) at the work surface. |
| Construction |
Aluminum cabinet with front panel finished in corrosion resistant polyurethane enamel. |
| Warranty |
| Limited one year. |
| Miscellaneous |
| Power requirements - 115V, 60hz - 3.0 FLA
Heat Gain - 1000 BTUH Airflow - 650 CFM @ 90 FPM |
| Dimensional Drawing |
 |
For
additional information,
please contact your local Representative or
Distributor.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AND WITHOUT INCURRING LIABILITY FOR MODIFICATIONS TO EQUIPMENT PREVIOUSLY SOLD.
