Envirco: Innovators in Clean Air Technology
 

Download this Tech Data Sheet in PDF format
PDF | 75 Kb

TT Table Top Work Station

SPECIFICATIONS

Filters
Aluminum framed High Efficiency Particulate Air (HEPA) type, with a minimum efficiency of 99.99% at 0.3 micron, aerosol challenged (zero probed).
Prefilters
Washable type, polyurethane foam — 30% ASHRAE.
Airflow
90 feet per minute ±10 FPM average velocity measured 6 inches from the diffuser screen. Uniformity ±20% of average or better.
Motor/Blower Assembly

Direct drive, continuous duty 1/3 Hp with sealed-for-life bearings and inherent overload protection. Motor/blower assembly is electronically balanced (dynamically) and mounted on vibration dampening rubber mounts. Motor/blower assembly is designed to provide rated airflow through a 50% increase in initial static pressure.
Speed Controller
Solid state speed control with RFI suppression for adjusting airflow velocity.
Electrical

Standard 15 Amp, 115 V, single phase, 60 Hz, rubber covered cord with 3-prong grounded plug.

Recessed fluorescent lighting fixture provides 150 foot candles at the work surface.

Separate blower and light switches.

220 V, 50-60 Hz unit available with transformer.
Construction

Welded aluminum cabinet with exterior finished in corrosion resistant polyurethane enamel.

Non-glare plastic laminated work surface.

Removable 1/4 inch clear acrylic side panels.
Warranty
Limited one year.
Applications
  • Critical Sample Preparation
  • Hyperalimentation
  • I.V. Admixtures
  • Media Preparation
  • Microscopy Analysis
  • Pharmaceutical Preparation
  • Syringe Filling
  • Tissue Culture
  • Microelectronic Assembly
  • Optical Assembly
  • Quality Control Inspection Station
  • Sterility Testing
  • Reverse Flow Configuration for Particulate Containment
Options
  • Duplex Electrical Outlet, Part No. 10607
  • Lab Service, Part No. 10611
  • Magnehelic Pressure Differential Gauge, Part No. 10693
  • Matching Support Stand, Part No. 10606 (3-ft), 10631 (4-ft), 10632-002 (5-ft),10632 (6 ft)
  • Stainless Steel I.V. Rod, Part No. 10608 (3-ft), 10609 (4-ft), 10595-002 (5-ft), 10610 (6 ft)
  • Stainless Steel Side Panels (2), Part No. 830657
  • Stainless Steel Work Surface, Part No. 10612 (3-ft), 10613 (4-ft), 10614 (6 ft)
  • Ultraviolet Light Fixture, Part No. 10603 (3-ft), 10604 (4-ft),
    10600-002 (5-ft), 10605 (6 ft)

Model No. TT3624 TT3630 TT3636 TT4824 TT4830 TT4836
Part No. 10561 10562 10589 10563 10564 10576
Dimensions (inches) A 38.00 38.00 38.00 38.00 38.00 38.00
B 41.00 47.00 53.00 41.00 47.00 53.00
C 24.50 30.50 36.50 24.50 30.50 36.50
D 14.00 14.00 14.00 14.00 14.00 14.00
E 38.13 38.13 38.13 50.13 50.13 50.13
F 36.50 36.50 36.50 48.50 48.50 48.50
BTU / Hour 2950 2950 2950 3000 3000 3000
Ave. CFM @ 90 FPM 540 675 810 720 900 1080
Power Requirements
Amps @ 115 V/60 Hz		 7.5 7.5 7.5 7.6 7.6 7.6
Ship Weight, lbs. 260 280 300 315 330 350

 

Model No. TT4848 TT6030 TT7224 TT7230

TT3630
Reverse
Flow

 TT3630
Reverse
Flow
Part No. 10590 11120-001 10591 835333 822372 803829
Dimensions (inches) A 38.00 38.00 38.00 38.00 38.00 38.00
B 65.00 47.00 41.00 47.00 47.00 47.00
C 48.50 30.50 24.50 30.50 30.50 30.50
D 14.00 14.00 14.00 14.00 14.00 14.00
E 50.13 62.13 74.13 74.13 38.13 50.13
F 48.50 60.50 72.50 72.50 36.50 48.50
BTU/Hour 5500 5500 5500 5500 2950 3000
Ave. CFM @90 FPM 1440 1125 1080 1350 675 900
Power Requirements
Amps @ 115 V/ 60 Hz		 14 14 14 14 7.5 7.6
Ship Weight, lbs. 370 445 520 560 280 330

For additional information,
please contact your local Representative or Distributor.

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AND WITHOUT INCURRING LIABILITY FOR MODIFICATIONS TO EQUIPMENT PREVIOUSLY SOLD.