Hospi-Gard IsoClean CM

The Hospi-Gard IsoClean CM is a self-contained, ceiling mounted, high efficiency particulate air (HEPA) filtration system designed to easily and economically create a negative pressure isolation room that will meet OSHA and CDC TB guidelines. The IsoClean CM mounts easily into a standard 2 x 4 ft (595mm x 1190mm) ceiling grid and other ceiling types to simplify the conversion of a standard room into a negative pressure isolation room for possible use with patients known or suspected of having TB, SARS or other infectious diseases.

The air passing through the HEPA filter is cleansed of 99.99% of airborne particulates as small as 0.3 micron and may be exhausted directly to the exterior by attaching flexible ducting to an optional 12 in. (294mm) duct collar positioned on the top of the unit.

The IsoClean CM filter contains 220 square feet (20.44 square meters) of media to extend the usable lifetime before filter loading occurs, resulting in decreased cost and fewer filter changes.

Low Cost Isolation Room
The IsoClean CM easily and economically converts a standard room into a negative pressure, patient isolation room without major room renovations.

Adjustable Airflow
With variable speeds up to 700 cubic feet per minute (CFM) or1190 m³/hr, the IsoClean CM provides effective air filtration for a wide variety of room sizes.

Room Air Changes Per Hour
Provides up to 24 room air changes per hour (ACH) in a typical 18 x 12 x 8 ft (5.2 x 35.2 x 2.35 m) patient room or 12 ACH for rooms up to 3,500 cubic feet (99.1 cubic meters).

Space Saving Ceiling Mounted Design
The IsoClean CM installs directly into a T-bar ceiling grid system and other ceiling types, leaving critical floor space open.

Simple Maintenance
The HEPA filter, prefilter and motor/blower are easily accessible from within the room for ease of replacement or maintenance by authorized personnel.

Quiet Operation
The IsoClean CM will not disturb others nearby - less than 57 dBA measured 30 in. (735 mm) from the filter face while on its highest speed.

HEPA Filter
Aluminum Framed HEPA type, with a minimum efficiency of 99.99% @ 0.3 micron, aerosol challenged (zero probed).

Prefilter
Woven polyester media in a removable frame extends the life of the HEPA filter.

Airflow
Variable speed provides up to 700 CFM ±10%.

For additional information, please contact your local representative.

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AND WITHOUT INCURRING LIABILITY FOR MODIFICATIONS TO EQUIPMENT PREVIOUSLY SOLD.