Enviralab Sterility Module: A Self-contained Clean Work Station with
Unique Laminar Airflow Pattern

The Envirco Enviralab Sterility Module (ESM) is a positive pressure† laminar flow clean bench that is completely self-contained. It provides an ISO Class 5* (Class 100) environment within the work area that complies with the latest IEST Recommended Practices.

The ESM has a modular design with a unique airflow pattern that provides the non-aspirating action of vertical flow, while retaining the positive work protection of horizontal flow. Air from within the cabinet is returned to the room through the front access opening.

• An ISO Class 5* environment utilizing an aerosol challenged high efficiency particulate air (HEPA) filter
• Exclusive airflow design with an all stainless steel interior construction
• Three standard sizes with 26 in. (660.4 mm) deep work areas
• Fluorescent lighting fixture provides 100 foot candles (1076 Lux) at the work surface.
• Shielded ultraviolet (UV-C) lamp enhances sterilization of the work surface when the cabinet is not in use
• Stainless steel I.V. rod
• Covered duplex electrical outlet, 115 V, 15 Amp installed on right rear wall
• Color-keyed airflow meter
• A welded steel cabinet with exterior finished in corrosion resistant polyurethane enamel
• Perforated aluminum diffuser screen protects the HEPA filter and maintains uniform airflow velocity within the work area
• Quiet operation (65 dBA ± 3 measured 30 inches (762 mm) from the filter face)
• Optional, matching support stand serves as a base for the ESM Module to provide a console-type work station
• CSA approved

†Note: Positive pressure laminar flow clean benches provide product protection only. Does not protect personnel or the environment from aerosols generated within the work area.

*Note: As defined by the latest ISO 14644 and IEST Recommended Practices, where particle count does not exceed 3520 particles, 0.5 µm or larger, per cubic meter of air.

For additional information, please contact your local representative.

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AND WITHOUT INCURRING LIABILITY FOR MODIFICATIONS TO EQUIPMENT PREVIOUSLY SOLD.