|
Hospi-Gard®
IsoClean® UV
SPECIFICATIONS
| 6 in. (152 mm) Exhaust Port |
| Located on top of the unit for use as a split system to create
both negative pressure and clean air recirculation. |
| Motor/Blower Assembly |
| Direct drive, continuous duty, 1/3 Hp, (25 kW), 3-speed
motor with sealed-for-life bearings and inherent overload
protection located on the "clean side" of the filter.
Motor/ blower assembly is mounted on vibration dampening
rubber mounts and designed to provide rated
airflow through a 50% increase in initial static pressure. |
| Electrical |
| Standard 5-15P, 115 V, single phase, 60 Hz, rubber-covered
cord with 3-prong hospital grade, grounded plug. |
| Construction |
| Welded aluminum filter plenum and blower housing with a
corrosion resistant polyurethane enamel finish. Four 2 in.
(51 mm) casters, two locking. |
| Warranty |
| Limited one year. |
| Hospital Applications |
- Negative Pressure Rooms
-
Emergency Rooms
-
Waiting Rooms
- Intensive Care Units
-
Hospital Reconstruction
-
Sputum Induction
-
Bronchoscopy Rooms
-
Renal Dialysis Rooms
-
Aerosol Pentamidine
Treatment
|
| Other Applications |
- Clinics
- Physician Offices
-
Correctional Facilities
-
Nursing Centers
-
Homeless Shelters
-
Addiction Recovery Centers
|
| Options |
- IsoCleanŽ UV with ULPA Filter Upgrade, Part No. 10850-006
- Minihelic Pressure Gauge, Part No. S11129-001
- Keylock ON/OFF Switch, Part No. S11073-001
- Anti-Microbial Prefilter, Part No. 63352
- Carbon Prefilter, Part No. 63349
- 8 in. (203 mm) 100% Exhaust Collar Kit, Part No. 23877-002P
- Room Pressure Monitor, Part No. 63337
- Annunciator, Part No. 63338
- 230 V, 50-60 Hz unit available Part No. 10921-004
|
 |
| Part
Number |
10850-005 |
| Airflow,
CFM (m3/hour) |
Low: 550 (935) Medium: 690 (1,173) High: 800 (1,360)
|
| Power Requirements
Amps @ 115 V/60 Hz
(230 V/50-60 Hz) |
8.0 (4.0)
|
| UL Listed |
All Parts |
Dimensions,
Inches
(millimeters) |
A |
62.25
(1588) |
| B |
19.75
(502) |
| C |
23.75
(604) |
| D |
12.75
(324) |
Unit
Weight, lbs.
(kilograms) |
150
(68.0) |
For
additional information,
please contact your local Representative or
Distributor.
SPECIFICATIONS
ARE SUBJECT TO CHANGE WITHOUT NOTICE AND WITHOUT INCURRING LIABILITY FOR
MODIFICATIONS TO EQUIPMENT PREVIOUSLY SOLD.
|
|