Envirco: Innovators in Clean Air Technology
 

Download this Tech Data Sheet in PDF format
PDF | 121 Kb
Hospi-Gard® IsoClean®

SPECIFICATIONS

6 in. (152 mm) Exhaust Port
Located on top of the unit for use as a split system to create both negative pressure and clean air recircuation.
Motor/Blower Assembly
Direct drive, continuous duty, 1/3 Hp, 25 kW, 3-speed motor with sealed-for-life bearings and inherent overload protection located on the "clean side" of the filter. Motor/blower assembly is mounted on vibration dampening rubber mounts and designed to provide rated airflow through a 50% increase in initial static pressure.
Electrical
Standard 5-15P, 115 V, single phase, 60 Hz, rubber covered cord with 3-prong hospital grade, grounded plug.
Construction
Welded aluminum filter plenum and blower housing with a corrosion resistant polyurethane enamel finish.

Four 2 in. (76 mm) casters, two locking.
Warranty
Limited one year.
Hospital Applications
  • Negative Pressure Rooms
  • Emergency Rooms
  • Waiting Rooms
  • Intensive Care Units
  • Hospital Reconstruction
  • Sputum Induction
  • Bronchoscopy Rooms
  • Renal Dialysis Rooms
  • Aerosol Pentamidine Treatment
Other Applications
  • Clinics
  • Physician Offices
  • Correctional Facilities
  • Nursing Centers
  • Homeless Shelters
  • Addiction Recovery Centers
Options
  • IsoClean with ULPA Filter Upgrade, Part No. 10850-002
  • Minihelic Pressure Gauge, Part No. S11129-001
  • Keylock ON/OFF Switch, Part No. S11073-001
  • Anti-Microbial Prefilter, Part No. 63352
  • Carbon Prefilter, Part No. 63349
  • 8 in. (203 mm) 100% Exhaust Collar, Part No. 11055
  • Room Pressure Monitor, Part No. 63337
  • Annunciator, Part No. 63338
  • 220 V, 50-60 Hz unit available Part No. 10921

 

Part Number 10850
Average CFM
(m3/hour) 		Low: 550 (935)
Medium: 690 (1.173)
High: 800 (1,360)
Power Requirements
Amps @ 115 V/60 Hz
(230 V/50 Hz)		 7.0
(3.5)
CUL Listed Yes
Dimensions, inches
(millimeters) 		A 68.50 (1740)
B 15.75 (401)
C 23.75 (604)
D 8.75 (223)
Unit Weight, lbs.
(kilograms) 		125 (56.7)

For additional information,
please contact your local Representative or Distributor.

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AND WITHOUT INCURRING LIABILITY FOR MODIFICATIONS TO EQUIPMENT PREVIOUSLY SOLD.